Skip to main content

TTTConfig

Struct TTTConfig 

Source
pub struct TTTConfig {
Show 15 fields pub learning_rate: f64, pub gradient_steps: u32, pub max_grad_norm: f64, pub min_input_length: u32, pub max_ttt_context: u32, pub enabled: bool, pub tau_skip: f32, pub tau_light: f32, pub tau_heavy: f32, pub tau_reject: f32, pub delta_min: f32, pub adaptive_steps: bool, pub max_adaptation_ms: u64, pub max_gradient_steps: usize, pub pending_rollback_ms: u64,
}
Expand description

Configuration for Test-Time Training

Fields§

§learning_rate: f64

Learning rate for TTT adaptation Higher than fine-tuning since we do few steps Recommended: 1e-4 to 5e-4

§gradient_steps: u32

Number of gradient steps per input More steps = better adaptation but higher latency Recommended: 1-5

§max_grad_norm: f64

Maximum gradient norm for clipping

§min_input_length: u32

Minimum input length (tokens) to trigger TTT Short inputs don’t benefit from adaptation

§max_ttt_context: u32

Maximum input length to process for TTT Truncates very long inputs to control latency

§enabled: bool

Whether TTT is enabled

§tau_skip: f32

Perplexity threshold below which adaptation is skipped (input already well-modeled)

§tau_light: f32

Perplexity threshold for light adaptation (1 step)

§tau_heavy: f32

Perplexity threshold for heavy adaptation (3 steps)

§tau_reject: f32

Perplexity ceiling above which adaptation is skipped (likely adversarial/garbage input). Very high perplexity indicates the input is far from the model’s training distribution and gradient steps would be noise or potentially adversarial weight poisoning.

§delta_min: f32

Minimum loss improvement to consider adaptation beneficial (confidence gate)

§adaptive_steps: bool

Whether to use adaptive step counts based on perplexity

§max_adaptation_ms: u64

Maximum wall-clock time for a single TTT adaptation pass (milliseconds). When using ZMQ RPC (default timeout 30s), the default leaves headroom for serialization, network transfer, and response processing.

§max_gradient_steps: usize

Hard ceiling on gradient steps per request, regardless of client override. Prevents unbounded compute from malicious or misconfigured clients.

§pending_rollback_ms: u64

Auto-rollback timeout for pending adaptations (milliseconds). After a non-auto-commit training, the server holds the pre-adaptation snapshot for this long before auto-rolling back. Increase for interactive workflows (MCP, human-in-the-loop); decrease for programmatic API clients.

Trait Implementations§

Source§

impl Clone for TTTConfig

Source§

fn clone(&self) -> TTTConfig

Returns a duplicate of the value. Read more
1.0.0 (const: unstable) · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for TTTConfig

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
Source§

impl Default for TTTConfig

Source§

fn default() -> TTTConfig

Returns the “default value” for a type. Read more
Source§

impl<'de> Deserialize<'de> for TTTConfig

Source§

fn deserialize<__D>( __deserializer: __D, ) -> Result<TTTConfig, <__D as Deserializer<'de>>::Error>
where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer. Read more
Source§

impl Serialize for TTTConfig

Source§

fn serialize<__S>( &self, __serializer: __S, ) -> Result<<__S as Serializer>::Ok, <__S as Serializer>::Error>
where __S: Serializer,

Serialize this value into the given Serde serializer. Read more

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
§

impl<T> Any for T
where T: Any,

§

fn into_any(self: Box<T>) -> Box<dyn Any>

§

fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>

§

fn type_name(&self) -> &'static str

§

impl<T> AnySync for T
where T: Any + Send + Sync,

§

fn into_any_arc(self: Arc<T>) -> Arc<dyn Any + Sync + Send> ⓘ

§

impl<'a, T, E> AsTaggedExplicit<'a, E> for T
where T: 'a,

§

fn explicit(self, class: Class, tag: u32) -> TaggedParser<'a, Explicit, Self, E>

§

impl<'a, T, E> AsTaggedImplicit<'a, E> for T
where T: 'a,

§

fn implicit( self, class: Class, constructed: bool, tag: u32, ) -> TaggedParser<'a, Implicit, Self, E>

Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
Source§

impl<T> DynClone for T
where T: Clone,

Source§

fn __clone_box(&self, _: Private) -> *mut ()

Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

§

impl<T> FromRef<T> for T
where T: Clone,

§

fn from_ref(input: &T) -> T

Converts to this type from a reference to the input type.
§

impl<T> FutureExt for T

§

fn with_context(self, otel_cx: Context) -> WithContext<Self>

Attaches the provided Context to this type, returning a WithContext wrapper. Read more
§

fn with_current_context(self) -> WithContext<Self>

Attaches the current Context to this type, returning a WithContext wrapper. Read more
§

impl<T, W> HasTypeWitness<W> for T
where W: MakeTypeWitness<Arg = T>, T: ?Sized,

§

const WITNESS: W = W::MAKE

A constant of the type witness
§

impl<T> Identity for T
where T: ?Sized,

§

const TYPE_EQ: TypeEq<T, <T as Identity>::Type> = TypeEq::NEW

Proof that Self is the same type as Self::Type, provides methods for casting between Self and Self::Type.
§

type Type = T

The same type as Self, used to emulate type equality bounds (T == U) with associated type equality constraints (T: Identity<Type = U>).
§

impl<T> Instrument for T

§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more
§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

impl<T> IntoRequest<T> for T

Source§

fn into_request(self) -> Request<T>

Wrap the input message T in a tonic::Request
§

impl<T> JaggedSlice<T> for T

§

type Index = Index2

§

fn push_into(self, array: &mut Jagged<T>)

§

fn insert_into(self, index: <T as JaggedSlice<T>>::Index, array: &mut Jagged<T>)

§

impl<T> NoneValue for T
where T: Default,

§

type NoneType = T

§

fn null_value() -> T

The none-equivalent value.
§

impl<T> NoneValue for T
where T: Default,

§

type NoneType = T

§

fn null_value() -> T

The none-equivalent value.
§

impl<T> Pointable for T

§

const ALIGN: usize

The alignment of pointer.
§

type Init = T

The type for initializers.
§

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more
§

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more
§

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more
§

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more
§

impl<T> PolicyExt for T
where T: ?Sized,

§

fn and<P, B, E>(self, other: P) -> And<T, P>
where T: Policy<B, E>, P: Policy<B, E>,

Create a new Policy that returns [Action::Follow] only if self and other return Action::Follow. Read more
§

fn or<P, B, E>(self, other: P) -> Or<T, P>
where T: Policy<B, E>, P: Policy<B, E>,

Create a new Policy that returns [Action::Follow] if either self or other returns Action::Follow. Read more
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
Source§

impl<T> Serialize for T
where T: Serialize + ?Sized,

Source§

fn erased_serialize(&self, serializer: &mut dyn Serializer) -> Result<Ok, Error>

§

impl<T> ServiceExt for T

§

fn map_response_body<F>(self, f: F) -> MapResponseBody<Self, F>
where Self: Sized,

Apply a transformation to the response body. Read more
§

fn trace_for_http(self) -> Trace<Self, SharedClassifier<ServerErrorsAsFailures>>
where Self: Sized,

High level tracing that classifies responses using HTTP status codes. Read more
§

fn trace_for_grpc(self) -> Trace<Self, SharedClassifier<GrpcErrorsAsFailures>>
where Self: Sized,

High level tracing that classifies responses using gRPC headers. Read more
§

fn follow_redirects(self) -> FollowRedirect<Self>
where Self: Sized,

Follow redirect resposes using the Standard policy. Read more
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

§

fn vzip(self) -> V

§

impl<T> WithSubscriber for T

§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a [WithDispatch] wrapper. Read more
Source§

impl<T> DeserializeOwned for T
where T: for<'de> Deserialize<'de>,

§

impl<T> ErasedDestructor for T
where T: 'static,

§

impl<T> MaybeSend for T
where T: Send,

§

impl<T> MaybeSend for T
where T: Send,

§

impl<T> MaybeSync for T
where T: Sync,

§

impl<T> MaybeSync for T
where T: Sync,

§

impl<E> ResultError for E
where E: Send + Debug + Sync,

§

impl<T> ResultType for T
where T: Send + Clone + Sync + Debug,

§

impl<T> RpcMessage for T
where T: Debug + Serialize + DeserializeOwned + Send + Sync + Unpin + 'static,

§

impl<T> SendSyncUnwindSafe for T
where T: Send + Sync + UnwindSafe + ?Sized,

Source§

impl<T> TerminalState for T
where T: Clone + Send + Sync,